Advantages and disadvantages of wheat peeling and flour making in wheat flour mill field

1.Principle of wheat peeling and flour milling technology

According to the structural characteristics of wheat grains, wheat peeling and flour milling is to peel off the cortex, which accounts for 70% of the total amount of wheat outside the groin before grinding, leaving a relatively pure "refined wheat", and then grinding and processing it into flour. Because most of the wheat husks have been stripped, and then the wheat skin and endocarp in the wheat groin are separated from the endosperm, which greatly reduces the task of stripping and scraping, reduces the possibility of wheat husks mixed into wheat flour, and provides conditions for maximizing the quality of wheat flour.

Wheat grains

2.Cleaning technology and equipment for wheat peeling and flour milling

The cleaning process of wheat peeling and milling is as follows: raw wheat, sifting, gravity grading destoner, selection, moisture, sifting, spraying, moisture bin, magnetic separator,peeling,air selection,vibrating dampener, magnetic separation, net wheat bin, and IB mill.

Flow sheet of wheat cleaning and flour processing

The key equipment of wheat peeling and flour milling: 1. Vibrating moisture dampener. After adding water, the wheat is stirred slowly in the vibrating machine body, and is fed from the inlet port to the outlet port. Because vibration destroys the surface tension of water, water can be absorbed quickly, and correspondingly reduces the moistening time. (2) wheat peeler. Under the action of high-speed airflow, wheat grains rotate and roll in three-dimensional, which makes the cortex peel off the wheat grains more completely. The whole peeling process consists of magnetic separation, constant temperature, atomizing water, rapid conditioning, air separation, peeling and screening.

Wheat and the husk

3.Advantages and disadvantages of wheat peeling and flour making

Compared with traditional flour milling technology, wheat peeling and flour milling technology has obvious advantages. With the help of machinery, it strips and scrapes wheat, removes several layers of wheat skin with low toughness and strength, and then grinds and extracts wheat flour after stripping and scraping, so as to achieve the purpose of rational and economic utilization of wheat resources. The use of wheat peeling technology and improved flour milling technology can improve the flour-making efficiency. The yield of low ash wheat flour and crude flour in the centrifugal grinding system can be increased by 2%. At the same time, the sand impurities mixed in the outer skin can be removed, and the service life of the tooth roll of the mill can be greatly improved. Since 70% of the wheat husk has been removed in the cleaning stage, the back road flow can be enlarged appropriately and the production capacity can be increased by about 10%.

Because the bran source mixed with wheat flour can be reduced by 60%~70% by stripping wheat husk ahead of time, the ash content of wheat flour can be reduced, and the color of wheat flour can be improved, which lays a foundation for improving the quality of wheat flour. By peeling, wheat not only removes a lot of dust, but also removes bacteria and fungi, and reduces the pollution of wheat flour such as pesticide residues. Using peeler instead of wheat washing, wheat beating, wheat scrubbing and surface treatment simplifies the cleaning process, saves about 80% of water and over 20% of equipment investment. In the process of flour milling, because the wheat cortex has been grinded off before entering the mill, the grinded materials can be classified and sifted to put forward more pure residue and wheat core. Therefore, the slag grinding system can be simplified, and the cleaning facilities with large volume, complex structure and large exhaust volume can be omitted.

After peeling, wheat cracks due to endosperm structure, loosening and holding waste heat, which is conducive to accelerating the penetration rate of water in endosperm. After adding water for 2 to 4 hours, the purpose of moistening wheat can be achieved. It can effectively adopt the advanced technology of multi-export single-wheel dynamic moistening. The storage capacity of the dynamic wheat is only about 25% of the traditional process, and the wheat spray water process before grinding can be omitted. Peeling off the cortex and retaining the paste layer to the maximum extent is the unique feature of peeling and flour making process. The aleurone layer contains albumin and globulin. When dough is fermented, they have the properties of enzyme coagulation. Therefore, wheat flour produced by peeling and flouring process is not only nutritious, but also has a larger volume of bread. According to the determination of alpha-amylase by experts concerned, the ratio of damaged starch content of the same raw material after peeling and traditional flour milling is 4:9, which shows that the starch damage caused by peeling is far less than that of traditional flour milling, thus greatly increasing the dough stability time and improving the baking performance of wheat flour.

Because of the special structure of wheat grains, it is impossible to completely peel and process the flour, and the drawbacks of wheat peeling and flour making technology are more prominent. Firstly, there is no obvious separation layer between cortex and endosperm, on the contrary, there is a close combination between them, which obviously can not peel off the cortex like the rice hulling method. At the same time, because wheat grain has a groin which contains 1/4-1/3 of the whole epidermal tissue and irregularity of its shape, it is difficult to peel off the cortex including the groin without breaking the endosperm. Secondly, because of the uneven peeling, the wheat bark still retains seed coat, especially about 30% of the bran in the wheat groin needs to be removed in the flour road.

Because the exocarp with high fibre content is peeled off, the bran entering the flour is thin and fragile, the Endosperm on the bran is difficult to scrape, and the seed coat with pigments is not peeled off. It is more difficult to separate from wheat flour than the traditional method. Mixing into wheat flour affects the color and ash. Thirdly, peeling and moistening part of the endosperm starch exposed, high viscosity, in case of power failure, public rest, wheat arching and caking which will result difficulties in inter-flour processing. Because of the short road and strong grinding, the processing accuracy is low. When the Powder yield is less than 4% than that of foreign advanced traditional technology, the total ash content is higher than 0.1%. Because of the distinct structure of wheat and brown rice, it is easy to strip the outer skin of wheat grain, excluding wheat furrows. It is difficult to strip the outer skin completely without harming the endosperm. The control of watering and moistening before peeling still needs to be improved. Some peeling machines will inevitably block the screen, reduce the rate of leaking wheat or peeling, and arching of storage barn. All of these need to be improved by automatic control technology. The change of wheat grain properties after peeling and the subsequent research on the technical characteristics and technological settings of grinding rollers need to be further improved.

For more technology or information of wheat cleaning and wheat flour processing,please contact us technicians by email: lila@hdfmill.com

Whatsapp/Mobile/Wechat:+8613933050153

Web: www.hong-de-fa.com

www.hongdefa.co.za

#wheatflour #wheatprocessingmachine #wheatprocessing #wheatflourmill #wheatmilling #flourmilling #flourmill #wheatflorumillingmachine #wheat #hongdefa

Zambia 240T/24H Maize flour milling mill plant complete line

How to Identify good quality flour?

The quality standards and testing methods of wheat flour formulated by the country are difficult for many consumers to check the quality of wheat flour because of the need for inspection, laboratory technology and special testing instruments. But direct discrimination through sensory organs is a simple and easy-to-grasp testing method. This kind of sensory testing is to synthesize the quality of wheat flour by watching, smelling, kneading, twisting and biting.

Wheat grains

Watching:

Watching the pink bran of wheat flour can reflect its processing accuracy. Wheat flour bran plays a decisive role in the appearance of products. After milling and grinding, it scrapes the endosperm from the epidermis and it grinds the endosperm to the very fine parts. Generally speaking, the higher the accuracy of wheat flour processing, the lower the flour yield, the smaller the bran star containing broken bran, the whiter the flour. When the processing precision is higher, the flour size is more fine, and the flour color is white because of the light irradiation. The grain color and quality are different, the color of wheat flour is different too. Under the condition of low flour yield and low processing precision, the darker the grain color of wheat is, the darker the processed product is, and the color of wheat flour produced by white-skinned wheat is lower than that from soft-skinned wheat. It is because that in the flour processing process, white wheat bran is not easy to detect when it is mixed in the wheat flour, while red wheat bran is easy to detect when it is mixed and make the flour darker. Hard wheat endosperm is slightly yellow, soft wheat endosperm is milky white.

Wheat grain

Smell:

The wheat flour with good quality has normal odor and inherent sweet smell. It is very vulnerable to mildew and bacteria when we store it, and even oxidative deterioration. Mildewed wheat flour has a sour taste. When it is infected by pests (such as mites and beetles, it also produces sour taste. Mites can be identified by examining wheat flour or by the unique odor of mites). Feverish and mildewed wheat flour, through stored for a short time, has a low fatty acid value, but often has an unpleasant bitter taste (it is fatty acid decomposed, and then oxidizes acid to produce aldehydes and ketones). As a result, wheats with mildew and deterioration have peculiar odor, which seriously stimulates the sense of smell. If there are trace pesticides,it also cause peculiar odor, these can cause poisoning and should not be eaten.

Wheat flour

Kneading:

That is to say, to judge the moisture content of wheat flour by hand, to grasp a handful of flour with hand, to press it a little hard, to shake gently after loosening hands. If the flour disperses, the moisture content is within the scope of national standards, if not dispersed, the moisture content is not easy to be stored for a long time. Relevant experiments have proved that when the moisture content is 13.5%+0.5% and the temperature is over 30 ~C, it can only be stored for a short time.If it is processing after Autumn and 14% of the moisture content can be stored for half a year. When the moisture content reaches 15% and the temperature is above 20 ~C, it will quickly become hot and mildew. In addition, with the increase of water content, the actual weight of flour decreases, invisibly it harms the interests of consumers.

Twist:

That is to twist wheat flour, if it is uniform particle size and soft then it is of good quality, if too smooth or rough then the quality is poor.


In a word, according to the methods of watching, smelling, kneading and twisting, the quality of flour can be generally identified. For some adulterated fake flour, the final determination should be made by further qualitative and quantitative chemical analysis.


If you wish to know knowledge of the wheat flour and wheat flour processing,please contact us freely at:

Email: lila@hdfmill.com Whatsapp: +86 13933050153

Web: www.hong-de-fa.com

#wheatflour #flour #flourprocessing #wheatprocessing

What is the Factors affecting the whiteness of flour?

As the main staple food and food processing raw material in the world, whiteness is one of the important indicators that influence the quality of its evaluation. The factors affecting the whiteness of flour are multifaceted. As a professional factory of wheat flour mills, Hongdefa had the following analysis of factors affecting flour whiteness from a professional perspective.

Wheat

1. Influence of raw materials
In terms of raw materials, the softness and hardness of the wheat, the color and the oldness, and whether it is hot during the storage process, and insects, can affect the whiteness of the wheat flour;
The endosperm of durum wheat contains more carotene, the color of endosperm is milky yellow, so the processed flour is darker than soft wheat. In the process of milling, a small amount of wheat bran is inevitably broken into bran stars and mixed into flour. Because the white wheat bran is light, it is not obvious when mixed into the flour, so the flour processed by white wheat under the same conditions is white; 

different kinds of wheat

the cortex of old wheat and heated wheat will become more breakable, and it is easy to be broken, the flour has more bran stars and darker color;

the newly harvested wheat has higher physiological activity, loose structure and poor quality stability,so the produced flour is pink and dark；

Moth wheat contains a small amount of eggs and excreta. When grinding flour, it is easy to make the flour dark because of its hormone and other reaction；

When wheat has more scab grains and black embryo wheat, the flour produced is poorer in color;

Organic impurities in raw grains also affect the flour color, such as barley, which easily causes the flour to turn green. In addition, different wheat varieties and origins, different mineral and nitrogen contents in the soil of wheat growth also affect the whiteness of wheat.

Different kind of wheat flour in different colors

1. Quality control effect of milled wheat

In the process of wheat processing, it is usually required that the dust mustard impurities in the milled wheat should not exceed 0.2%, of which the sand and stone should not exceed 0.015%, and the grain impurities should not exceed 0.5%. There are no magnetic metal impurities in the milled wheat, and the grinding water and the time of moistening wheat meet the requirements.

After several routes of screening, beating, suction and stone removal, the impurities entrained and surface impurities of wheat can be removed mostly. However, in the later conveying process of bucket elevator, screw conveyor and chute, the friction between wheat grain and wheat grain, wheat grain and equipment will regenerate some wheat fur and wheat skin. In addition, the dust remaining in wheat skin, wheat germ and wheat ditch, which is torn by wheat beater, will also fall off, forming new entrainment impurities affecting the flour color.

Cleaning machines

Hongdefa's cleaning process is divided into wet cleaning and dry cleaning to ensure that impurities can be cleaned up very cleanly.

Wet way cleaning is to remove stubborn impurities by washing the wheat after several routes of screening, beating, suction, stone removal and other comprehensive cleaning.

Washing machine

Dry way cleaning is that the wheat will have second time screening, beating, suction, stone removal and other comprehensive cleaning.

To remove the stubborn impurities after the fist time cleaning and moisture.

Dry way cleaning system

Wet cleaning saves equipment investment, and its disadvantage is large water consumption and waste water can not be reused, resulting in a large amount of water pollution. Despite the large investment in equipment, dry cleaning saves water resources and does not produce waste water pollution.

Customers can flexibly choose cleaning methods according to local requirements.

In addition, the control of water and time of wheat moistening will also have a great impact on flour color. Because proper watering and moistening can weaken the binding force between wheat cortex and endosperm and enhance the toughness of the cortex. During the subsequent grinding process, the endosperm is easy to peel off the cortex and the cortex is not easy to break up, thus reducing the content of bran in the flour and improving the flour pink. On the contrary, if the water content and moistening time are not properly controlled, the flour color will be worse.

3.Flour system Design and Operation Regulation Effect

The length of the flour system design has a greater impact on flour color. For example, the shorter the design of flour road, in order to ensure the yield of powder, it is necessary to enhance the grinding strength of the mill. The increase of grinding strength will increase the percent of crushing of wheat skin, increase the quantity of bran in the powder, and make the flour color worse. Compared with the shorter powder road, the longer powder route has more grinding times, so it can be lightly ground and fine grinding, thus reducing the crushing of wheat skin. Opportunities to improve flour whiteness.

Wheat flour milling system

But even in the long flour mill process, the unreasonable allocation of equipment in each system will affect the flour color, such as: the contact length of the front and middle road bran grinding roll is not enough, the production process may not be milled properly, resulting in a tight rolling distance, making the bran not easy to maintain integrity, the flour is easy to mix with bran, thus making the flour color worse; and also, the front and middle road flour grinding roll, If the contact length is not enough, the flour with low ash content will not be put forward in time and in sufficient quantity in front of the mill, will be pushed to the middle and back of the mill for repeated grinding, which will also make the flour color worse.

Advanced flour milling technology also needs high level of professional operation skills. If flour milling operators do not fully understand the design essentials of modern flour milling technology and grasp the key points of operation in flour milling process, such as: front skin grinding scraping rate, front core grinding rate, slag grinding system and the technological effect of flour cleaner, etc., flour color will be affected. There is a famous saying in flour milling industry. The proverb "three-point process, seven-point operation" fully reflects the importance of the control effect of flour milling system.

Hongdefa has more than 30 years experience in wheat flour milling and design. There are many more than 35 years of experience engineers to make the design equipment and control quality.

Hongdefa professional engineer team

Hongdefa provides overseas installation and commissioning training services. According to the customer's requirements, engineers can training in the customer's factory for more than 6 months or even a year until the customer's workers can operate the equipment skillfully and solve the daily problems afterwards.

Engineer Mr Huang in Zimbabwe client factory

Ethiopia Branch office people with 40T wheat flour client and workers

4 Other impacts

Whether wheat germ is ground into flour, grinding temperature, flour yield, flour coarseness and fineness, storage time and adding whitening agent can also affect flour whiteness. Under the same conditions, wheat germ is ground into flour, grinding temperature is too high, flour yield is high, flour particle size is coarse, storage time is short, without whitening agent, the wheat flour whiteness is much poor.

Micro dosser for the whitening agent

Hongdefa Machinery supply you best solution for the wheat flour mill processing. And have installed many big capacity wheat flour mills in different countries.

Like:

Ethiopia 500T/24H wheat flour milling machine;

Afghanistan 300T/24H wheat flour mill machine;

Egypt 200T/24H wheat flour milling machine;

Brazil 200T/24H wheat flour mill machine;

China 120T/24H wheat flour mills

.....

Afghanistan 300T/24H wheat flour mill

If you have any question about the wheat flour mill processing or want to know more about our flour milling machines, welcome freely contact with us:

Ms Lila Wei

Whatsapp/Wechat: +86 13933050153

Email: lila@hdfmill.com

Web: www.hong-de-fa.com

Skype: lylawei

#cleaningtechincalflourmill #millingtechnicalflourmill #wheatflourmill #flourmillingmachine #wheatflourmillingmachine #flourmillingline #hongdefa

How to Improve the quality and nutrition of your flour meal

Welcome to Shijiazhuang Hongdefa Machinery.Co.Ltd .We are a professional manufacturer of high quality technologically advanced maize ,wheat and corn milling machines. Today we give you more reasons why trading with us benefits your milling empire.

nutritional composition of a wheat seed

If we are to trace the history of milling machines , we discover that back in the age of time our forefathers and mothers planted and harvested maize,wheat and corn almost as we do nowadays. They would then physically grind them by means of crushing each grain by stones to obtain flour mill for consumption. This was a very laborious activity and time consuming.

Furthermore the end result flour meal was not as smooth and nutritious as the one we have nowadays .This was because a lot of nutrients would be lost during the process.

grain crushing in the past

The same case happens in this modern day when we mill our maize or wheat. A lot of nutrients are lost and quality is compromised during maize,wheat and corn milling process. To get the best nutrition out of our grains at the same time getting the best quality requires a good milling machine.

Getting the best nutrition and quality out of our grains is not only good for our milling business but also for the community around us. Our consumers will benefit health wise and socially.

Results of good maize milling

Now that we know what we want out of a milling machine and what a good machine should do , then comes the big question of how and where we can get this good milling machine.

The answer to that is right in front of you -- Shijiazhuang Hongdefa Machinery.Co.Ltd -- your ultimate superior supplier for all your maize and wheat milling needs.

roller mill workshop

At Shijiazhuang Hongdefa Machinery we have the latest technology , the latest information and highly specialized technicians and with this we roll out superior and market leading milling machines.

Hongdefa factory for maize wheat mill

These wheat flour mills and maize milling plants are internationally certified to suit all your milling needs wherever in the world you may be.

Maize milling plant and wheat flour mill factory

We have more than 30 years of experience in the milling business and we have supplied mills of different capacity to over 20 countries around the world.

Hondefa manufacture workshop

Take a look at one of our projects , the 300tonne per 24hour installed wheat milling machine.

Afghanistan 300T wheat flour mill

Connect with us today and get the best out of your milling business at the same time befitting your society. Get a Hongdefa maize,wheat or corn milling plant for yourself NOW!!!.

Visit www.hong-de-fa.com today.

For more details:

Tel/Whatsapp :+86 181 3200 2434

Email : lila@hdfmill.com

#hongdefa #maizemill #wheatflourmill #flourmill #flourmealbusiness #Chinamill #businessinvestment #grainmill

Hongdefa Founder--Mr Guo Zhenfa Introduction

Guo Zhenfa participated in the work in 1976. He worked in the Zhanhuang County Machinery Factory in Hebei Province. He has been engaged in the development and improvement of the Royal Brand flour milling machines. In the national industry standard acceptance, Guo Zhenfa made outstanding contributions to the 6fts-16, 6fts-15d and 6ffts-12t wheat flour mills , the commissioning operation showed that all the indicators were higher than the national standards, which laid a solid foundation for the Royal Brand flour machine to become a famous brand of the Ministry of Agriculture.

Mr Guo improved the wheat flour mill

took the photo before go to Africa install the first export flour mill from China

Because Guo Zhenfa's operating technology in first grade in the ndustry, he became the first technicians go to abroad to do the installation and commissioning of complete sets of wheat flour machines in China. In the 1990s, a set of flour processing equipment exported by Zanhuang Machinery Factory became China's first set of wheat flour mill equipment sold broad. This news caused a great sensation at that time, and the workmates of the whole factory enthusiastically sent technicians to go abroad.
Mr. Guo opened The Ethiopia market for China's flour mill in Africa. He installed the China's first flour mill in Ethiopia.

Mr Guo with Ethiopia client

After that, MR.Guo led the sales and installation team to travel in many countries, including Vietnam, Rwanda, Mozambique, Kenya, Tanzania, Ghana, Senegal etc. Among them, the 6fts-15d wheat flour mill machine which was installed by Guo Zhenfa in Burundi, East Africa in 1991, that has high powder extraction rate and produce good flour quality, The machine was highly praised by African friends. Guo Zhengfa was received by the then President of Burundi, Pierre Buyoya, and awarded International Friends Honorary Certificate.
In 2002, after the reform of state-owned enterprises, Guo Zhenfa established Shijiazhuang Africa Trading Co., Ltd. and set branch offices in Zimbabwe, Zambia, South Africa and Congo.
In 2004, Africa Trading company sold, design and installed one set of 500T/24h wheat flour mil machine in Ethiopia, which is the first large-scale flour mill machine in China.

Ethiopia 500T/24H wheat flour mill

Ethiopia 500T wheat flour mill advance machinery

In 2006, we installed a 60T/24h wheat flour mill machine in Egypt. In 2014, The owner expanded production and purchased one set of 200T/24h wheat flour mill machine. The owner was satisfied with the wheat flour mill machine design and quality. He warmly invited Mr. Guo to visit his factory and home.

60T/24H wheat flour mill in Egypt

200T/24h wheat flour mill machine in Egypt

In 2008, Guo Zhenfa invested 20 million in the Wumashan Industrial Zone to build a factory called Shijiazhuang Hongdefa Machinery Co., Ltd., covering an area of 40,000 square meters (60 acres) with a production workshop of more than 100 employees , and has independent sales, production, installation and after sale service one-stop team. The company mainly targets the research and development of maize and wheat processing machinery in Africa, South America and Southeast Asia, and produce processing equipment adapted to local people's conditions. It has set up branch office in Zimbabwe, Zambia, South Africa and Congo.

120T/24H wheat flour mill

120T/24H wheat flour mill line installed in Zimbabwe designed by Hongdefa

60T wheat flour mill in Brazil

Our Hongdefa wheat and maize flour milling equipment is sold to different countries all over the world and is welcomed by different countries clients, including South Africa, Brazil, Egypt, Zimbabwe, Zambia, Kenya, Tanzania, Argentina, Algeria, Rwanda, Nigeria, Angola and so on.

The factory of Shijiazhuang Hongdefa Machinery

To the maize milling plants, Mr. Guo’s team do the design with different requirements for different countries, such as POSHO in South Africa, UGALI in Uganda, SADZA in Zimbabwe, NSHIMA in Zambia, etc. as staple foods, people have different requirements on the mesh size of maize flour. They designed and improved the maize milling plant to bring high quality corn flour for the local residents.

100T maize mill

100t/24hrs maize mill plant in South Africa

1500t/24hrs maize mill plant in South Africa

1500t/24hrs maize mill plant in South Africa

150t/24hrs maize milling plant in Zambia

240t/24hrs maize milling plant in Angola

Mr. Guo has always followed the production of maize milling plant that best suits the needs of customers in different countries is the best.


Our Hongdefa Factory, always do our best to supply the most reasonable design and best quality maize milling plant and wheat flour mills to the clients all over the world.


Contact with us if you need the and wheat flour mills:


Marking manager: Ms Lila Wei


Whatsapp: +86 181 3200 2434


Email: lila@hdfmill.com


Web: www.hong-de-fa.com


#maizemillingplant #maizemillingmachine #maizemill #wheatflourmill #wheatflourmillingmachine #flourmillingmachine #flourmill #Hongdefa #Whatsapp0086181320024234

Brazil - The first stop in the South American market of Hongdefa -for wheat flour mills

The Federative Republic of Brazil, referred to as Brazil, is the largest country in South America and enjoys the reputation of the “kingdom of football”.

Brazilian flag

kingdom of football

Brazil's culture has multiple ethnic characteristics. As a national melting pot, there are immigrants from Europe, Africa and Asia. Football is the mainstream sport of Brazilian cultural life.

Brazil is located in eastern South America. To the east of the South Atlantic, the north, west and south are bordered by any country in South America (except Chile and Ecuador). It borders French Guiana, Suriname, Guyana, Venezuela and Colombia in the north, Peru, Bolivia in the west and Paraguay, Argentina and Uruguay in the south. The coastline is about 7,400 kilometers long. The width of the territorial sea is 12 nautical miles, and the overseas exclusive economic zone is 188 nautical miles.

Brazil is the largest country in South America with a territory of 8,154,900 square kilometers, accounting for 46% of the total area of South America. It ranks fifth in the world after Russia, Canada, China and the United States.

Brazilian map

Brazilian map

Brazilian coffee and maize

Brazil has developed agriculture and animal husbandry and is a major producer of cane sugar, coffee, citrus, corn, chicken, beef, tobacco and soybeans. Brazil is the world's largest coffee producer and exporter and is known as the “coffee kingdom”. Brazil is also the world's largest sugar producer and exporter, the second largest soybean producer and exporter, and the third largest corn producer. Corn exports rank among the top five in the world and the world's largest exporter of beef and chicken. The main food crop, corn, is distributed along the southeast coast.

Brasilia, the capital of the Federative Republic of Brazil, is the fourth largest city in Brazil. Located in the middle of the state of Goias, the Maranon River and the Wilde River merge into a triangle. Located on the plateau, the climate is mild and pleasant. The annual average temperature is 17.7 °C. The average annual precipitation is 1600 mm, and the rainy season is concentrated from October to April. The scenery here is beautiful, the climate is pleasant, the trees are green all the year round, and the flowers are unbeaten.

Brasilia

The port of Santos is located in the Gulf of Santos on the southeast coast of Brazil. It is located on the east bank of the island of SAO VICENTE and on the west bank of the island of SANT O AMARO. It is on the southwest side of the Atlantic Ocean and is the largest city in Brazil, São Paulo. The outer port of SAO PAULO) is 63km apart. Santos is the largest seaport in Brazil. It is also the world's largest coffee export port, and a transit port for Glassvia and Paraguay.

Port of Santos

Hongdefa , the professional manufacturer of maize milling plant and wheat flour mill , more than 30 years experience in milling market.We are willing to study and explore the South American market. Brazil is our important first stop.

Brazil wheat flour mill client

In 2012 we met him .After a series of discussions ,our Brazilian client bought our 60T/24H wheat flour mill. Total steel frame structure ,European standard ,Factory SGS certificate , BV certificate , ISO9001 certificate. It already running 6 years till now.

60T/24H wheat flour mill in Brazil 1 

60T/24H wheat flour mill in Brazil

In 2017, as the equipment worked well, the benefits were great and our client decided to expand the scale of production. This time he bought our 200T/24H wheat flour mill.It adopt 5-floor building .Our technical manager

Mr. Ma stayed in Brazil 6 months to operate the machine for client and trained client

200T wheat flour mill Brazil

purifier of the 200T wheat flour mill

Hope we can build more friendly contacts with our friends in Brazil.Hope that we can understand the needs of Brazilian customers more and more, and the exploration of the South American market is getting deeper and deeper.Hope the maize milling and wheat flour mill technology will make the world of people have a better life! And same time, hope our Hongdefa machinery can do more and more maize milling plant and wheat flour mill project for South American countries

Welcome more and more Brazil client contact with us talk more about the wheat flour mill and maize milling plants!

Contact with Lila for more:

Ms Lila Wei

Whatsapp:+8615931139230/+8618132002434

Email: lila@hdfmill.com

Web: www.hong-de-fa.com

#wheatflourmill#wheatflourmillingmachine #flourmill #maizemillingplant #maizemillingmachine #maizemill #Hongdefa #Egypt